- Very compact and simple low-cost type for use with STANDARD ABSOLUTE ENCODERS
- Flexible stainless steel cable Ø 0.5 mm
- Strong spring mechanics
- Precision cable drum directly set onto encoder's shaft
- Any incremental STANDARD ENCODER with flange of Ø 58 mm or EURO ENCODER ES 381 can be used

Inkrementaler Weggeber PLE 58
Linear Motion Transducer for 1500 mm range, with STANDARD INCREMENTAL ENCODER
Used encoder
Used encoder
Type explanation
PLE 58-15-10/EE58-6-1500-05-D-RC12
Measuring range | 15 = 1.500 mm |
Number of turns of the encoder shaft | 10 |
Encoder type | Incremental |
Number of channels | 3 = A + B + M |
6 = AA + BB + MM | |
Supply voltage | 05 = 5 VDC ±5% |
30 = 10 ... 30 VDC | |
Output driver | D-RS422 |
P | |
Position of connection | R |
S | |
Connector | C07 = 7 pins Binder |
C12 = 12 pins M23 | |
M10 = 10 pins MIL |
Technical data
Close all lists Open all listsMechanical data
Acceleration of cable | ≤ 100 ms-2 |
Side movement of cable | ≤ 3° |
Weight | ca. 0,5 kg |
Environmental conditions
Vibration | 100 ms-2 (20 ... 2000 Hz) |
Shock | 1000 ms-2 |
Operating temperature | 0 ... +70°C |
Storage temperature | -30 ... +80°C |
Atmospheric humidity | ≤ 95% r.h. |
Protection class | IP 65 (Standard Encoder EE 58) |
IP 40 (Mechanic of Linear Motion Transducer) |
Electrical data
Scanning type | Optical, without contact |
Transmitter, infrared | LED |
Receiver | Photo-Array |
Supply voltage | Vcc = 5 VDC ±5% |
Vcc = 10...30 VDC | |
Power consumtion | 200 mA max. |
Output frequency | ≤ 300 kHz (Output D) |
≤ 160 kHz (Output P) | |
Signal level | High > Vcc -2 V |
Low < 0,5 V | |
Load capacity of the outputs | 20 mA |
Cable
Wire colour | Signal |
---|---|
Brown 0,5 mm² | +Vcc |
Blue | +Vcc Sense 1) |
White 0,5 mm² | 0 V GND |
White | 0 V Sense |
Brown | Signal A+ |
Green | Signal A- 2) |
Grey | Signal B+ |
Pink | Signal B- 2) |
Red | Signal M+ |
Black | Signal M- 2) |
Shield | N.C. |
1) nur bei Vcc = 5 VDC TTL
2) nur bei 6 Ausgangskanälen
2) nur bei 6 Ausgangskanälen
Connector 7 pinsBinder
Connection | Signal |
---|---|
Pin 1 | 0 V GND |
Pin 2 | N.C. |
Pin 3 | Signal A |
Pin 4 | Signal B |
Pin 5 | +Vcc |
Pin 6 | Signal M |
Pin 7 | Shield |
Connector 12 pins M23
Connection | Signal |
---|---|
Pin 1 | Signal B- 1) |
Pin 2 | +Vcc Sense 2) |
Pin 3 | Signal M+ |
Pin 4 | Signal M- 1) |
Pin 5 | Signal A+ |
Pin 6 | Signal A- 1) |
Pin 7 | N.C. |
Pin 8 | Signal B+ |
Pin 9 | Shield |
Pin 10 | 0 V GND |
Pin 11 | 0 V Sense |
Pin 12 | +Vcc |
1) nur bei 6 Ausgangskanälen
2) nur bei Vcc = 5 VDC TTL
2) nur bei Vcc = 5 VDC TTL
Connector 10 pins MIL
Connection | Signal |
---|---|
Pin A | Signal B+ |
Pin B | Signal A+ |
Pin C | Signal M+ |
Pin D | +Vcc |
Pin E | +Vcc Sense |
Pin F | 0 V GND |
Pin G | Shield |
Pin H | Signal B- 1) |
Pin I | Signal A- 1) |
Pin J | Signal M- 1) |
1) nur bei 6 Ausgangskanälen
Output driver


Output channels / Output signals

Outline drawing

Version ZE 609-206 · Subject to change