
Incremental Display Module MOD 13
Display with programmable outputs for Incremental Encoder
MOD 13 - a programmable multifunctional display module for incremental encoders with output channel push-pull or RS422 line driver. Display parameters are fully programmable. MOD 13 has the usual standardfunction of a display modul, but additional two control outputs, which can be programmed separately as comparator, cam switch or pulse switch. Easy programming by four front-panel keys.
Case
for panel mounting
Dimensions 111 x 144 x 72 mm
8-digit 7-segment red LED display, 14 mm high
Weight max. 0,5 kg
Signal inputs
for operation of incremental encoders
- Input-signals
6 channels AA + BB/90° + MM RS422 line driver
or
3 channels A + B/90° +M with 5 V or 24 V voltage level - Input frequency up to 150 kHz
- Optically insulated by optocoupler
Display parameter
- Fully programmable
- Scale factor
- Decimal point
- Zero offset
Technical data
- Supply Voltage 10 .. 35 VDC
- Supply Voltage output 5 VDC, max. 350 mA
- Power Consumption max. 150 mA (without load)
- Operation temperature 0 .. 50° Celsius
Programmable control outputs
- Programmable separately as comparator, cam switch or pulse switch
- Switching threshold adjustable for complete indicating range
- Switching hysteresis adjustable
- Optocoupler with NPN-Transistor, Open Emitter with PTC
- Supply Voltage max. 35 VDC
- Output current max. 50 mA
- Output voltage min. supply voltage -2 V
- Optically insulated by optocoupler
Protection class
Front IP 50, with protective cover IP54,
rear IP 20
Technical data
Close all lists Open all listsTechnical Data
Supply voltage | +10 .. 35 VDC |
Power consumtion | max. 150 mA |
Supply voltage output for incremental encoder | 5 V max. 150 mA |
Cycle time | 5 ms |
Display range | -9999999 ... 99999999 |
Display | rote 7-Segment-LED-Anzeige 8-stellig mit 14 mm Ziffernhöhe |
8-digit 7-segment red LED display, 14 mm high | |
Data memory | EEPROM |
Operating temperature | 0 ... +50°C |
Connections | Klemmleiste / Terminal block |
max. 1,5 mm² | |
Weight | < 0,5 kg |
Protection class | Frontplatte / front: IP 50 |
mit Schutzgehäuse /with protective cover: IP 54 | |
Rückseite / rear:IP 20 |
Incremental input
Number of input signals | 6 = AA + BB/90° + MM |
Input circuit | RS422 |
Input voltage | max. 35 V |
Input frequency | max. 150 kHz |
Input restistance | 3 kOhm, Uin = 24 V |
350 Ohm, Uin = 5 V | |
Pulse width signal M | min. 2 µs |
Control inputs
Circuit | Optokoppler |
Input level Low | 0 ... +5 VDC |
Input level High | +10 ... 35 VDC |
Input restistance | 1,8 kOhm, Uin = 24 VDC |
Control outputs
Circuit | Optokoppler mit NPN-Transistor |
Open Emitter mit PTC | |
Supply voltage | max. +35 VDC |
Output voltage | min. Vcc -3,5 V, Iout = 50 mA |
min. Vcc -2,0 V, Iout = 20 mA | |
Output current | max. 50 mA |
Outline drawing


(1) Versorgungsspannung für die Ausgangsstufen <br>(2) 0 V für die Eingangsstufen<br>(3) 0 V für die Signaleingänge

Version ZE 608-203 · Subject to change