Inkrementaler Weggeber PLE 200
Compact and simple low-cost type
Housing of extruded aluminium sheath
Flexible stainless steel cable Ø 0,8 mm
Strong spring mechanics
Precision cable drum
  

Inkrementaler Weggeber PLE 200

Linear Motion Transducer with 30.000 mm, 40.000 mm and 50.000 mm range, with Standard Incremental Encoder ED 58

Used encoder

Used encoder
Standard Encoder ED 58

Type explanation

PLE 200-500-100/ED58-6-5000-05-D-RC12
Measuring range 300 = 30.000 mm
400 = 40.000
500 = 50.000
Number of turns of the encoder shaft Messlänge in mm / 500 mm
Encoder type Incremental
Number of channels 3 = A + B + M
6 = AA + BB + MM
Supply voltage 05 = 5 VDC ± 5%
30 = 10..30 VDC
Output driver D-RS422
P
Position of connection R
S
Connector C07 = 7 pins Binder
C12 = 12 pins M23
M10 = 10 pins MIL

Technical data

Mechanical data
Acceleration of cable ≤ 20 ms-2
Side movement of cable ≤ 3°
Weight ≈ 10 kg (PLE200-300-60)
≈ 11 kg (PLE200-400-80)
≈ 12 kg (PLE200-500-100)
Environmental conditions
Vibration 100 ms-2 (20 ... 2000 Hz)
Shock 200 ms-2
Operating temperature 0 ... +80°C
Storage temperature -40 ... +80°C
Atmospheric humidity ≤ 95% r.h.
Protection class IP 65 (Standard Encoder ED 58)
IP 40 (Mechanic of Linear Motion Transducer)
Electrical data
Scanning type Optical, without contact
Transmitter, infrared LED
Receiver Photo-Array
Supply voltage Vcc = 5 VDC ±5%
Vcc = 10...30 VDC
Power consumtion 200 mA max.
Output frequency ≤ 300 kHz (Output D)
≤ 160 kHz (Output P)
Signal level High > Vcc -2 V
Low < 0,5 V
Load capacity of the outputs 20 mA

Cable
Wire colourSignal
Brown 0,5 mm² +Vcc
Blue +Vcc Sense 1)
White 0,5 mm² 0 V GND
White 0 V Sense
Brown Signal A+
Green Signal A- 2)
Grey Signal B+
Pink Signal B- 2)
Red Signal M+
Black Signal M- 2)
Shield N.C.
1) nur bei Vcc = 5 VDC TTL
2) nur bei 6 Ausgangskanälen
Connector 7 pinsBinder
ConnectionSignal
Pin 1 0 V GND
Pin 2 N.C.
Pin 3 Signal A
Pin 4 Signal B
Pin 5 +Vcc
Pin 6 Signal M
Pin 7 Shield
Connector 12 pins M23
ConnectionSignal
Pin 1 Signal B- 1)
Pin 2 +Vcc Sense 2)
Pin 3 Signal M+
Pin 4 Signal M- 1)
Pin 5 Signal A+
Pin 6 Signal A- 1)
Pin 7 N.C.
Pin 8 Signal B+
Pin 9 Shield
Pin 10 0 V GND
Pin 11 0 V Sense
Pin 12 +Vcc
1) nur bei 6 Ausgangskanälen
2) nur bei Vcc = 5 VDC TTL
Connector 10 pins MIL
ConnectionSignal
Pin A Signal B+
Pin B Signal A+
Pin C Signal M+
Pin D +Vcc
Pin E +Vcc Sense
Pin F 0 V GND
Pin G Shield
Pin H Signal B- 1)
Pin I Signal A- 1)
Pin J Signal M- 1)

Output driver

Inkrementaler Weggeber PLE 200 Inkrementaler Weggeber PLE 200

Output channels / Output signals

Inkrementaler Weggeber PLE 200

Outline drawing

Inkrementaler Weggeber PLE 200

Version ZE 621-611 · Subject to change

Go back

INDUcoder® · INDUcoder Messtechnik GmbH, Kaiserstraße 316, 47178 Duisburg, Deutschland
Tel: (0203) 57047-0, Fax: (0203) 57047-20, E-Mail: info@inducoder.de, Internet: www.inducoder.de